CO POLYMER DE-WAXER

Co Polymer De Waxer is formulated as an alkaline cleanser for fast and safe removal of co polymer hard wax protective coatings that are applied to new vehicles to protect paintwork in transit.

Feed directly through a pressure washer on low pressure set at 60-70°C. Apply evenly to all surfaces. Allow 2-3 minutes contact ensuring surfaces remain wet throughout. Once the lacquer bond is broken fully rinse under pressure with clean water.

For Manual Use apply by spray or sponge. Use as supplied on heavy deposits. May be diluted up to 4:1 if required. Immediately folowing application agitate the surface with a soft sponge, ensuring that all surfaces remains wet througout the process. Immediately rinse with clean water once the lacquer bond is broken.

Never allow the product to dry on the surface of paintwork or trim. Do not use on hot surfaces or carry out procedure in direct sunlight. Suitable for use as a non acidic wheel cleaner

You may also be interested in this/these product(s):

P407 DE-WAXER £78.78 Add to Cart

WAXSOLVE £76.41 Add to Cart

PRESSURE SPRAY £16.11 Add to Cart