BRICK WASH SPECIAL

Brick Wash Special is formulated to rapidly clean and remove stubborn lime and mortar deposits from most hard surfaces. This acid based formulation includes a detergent which makes it suitable for cleaning down and the removal of carbon, furnace soot and diesel soot deposits from most surfaces including portable plastic chemical toilets as the acid is inert to the plastic structure of the toilet.

Always wear appropriate PPE when using Brick Wash Special ensuring that eyes and face are protected. Always wear waterproof and chemical resistant gloves when handling this product.

For normal usage the area should firstly be brushed to remove any loose growth and debris. Wet down the surface to be treated with clean water. Use Brick Wash  Special as supplied if there is heavy contamination otherwise dilute Brick Wash at a factor of 1 part to 5 parts water. For light application dilute 1 part to 10 parts water.

Always use a plastic container to dilute brick wash. Brush onto the surface to ensure the whole area is treated and leave to soak for 15 minutes. It may be necessary to agitate the surface treated using a strong nylon bristle brush to scrub off stubborn stains, before fully rinsing with a hosepipe or pressure washer. If the finished surface is slightly patchy then a second application at a dilution of 1:10 will achieve an even finish.

You may also be interested in this/these product(s):

SAFECLEAN EXTRA £23.98 Add to Cart

GRAFFITI REMOVER £4.89 Add to Cart

FLOOR WASH £15.08 Add to Cart

BRICK WASH £49.99 Add to Cart