Brick Wash is a full Industrial strength Acidic water based brick, stone and patio cleaner which removes cement and mortar splashes, oil stains, general dirt and other contaminants from surfaces. It is always advisable to test a small area first, especially when working with coloured stones, blocks, bricks, interior works and glazed tiles. Brick Wash will also remove salt blooming from brickwork. Always wear appropriate PPE when using Brick Wash ensuring that eyes and face are protected. Always wear waterproof and chemical resistant gloves when handling this product. For normal usage the area should firstly be brushed to remove any loose growth and debris. Wet down the surface to be treated with clean water. Use Brick Wash as supplied if there is heavy contamination otherwise dilute Brick Wash at a factor of 1 part to 5 parts water. For light application dilute 1 part to 10 parts water. Always use a plastic container to dilute brick wash. Brush onto the surface to ensure the whole area is treated and leave to soak for 15 minutes. It may be necessary to agitate the surface treated using a strong nylon bristle brush to scrub off stubborn stains, before fully rinsing with a hosepipe or pressure washer. If the finished surface is slightly patchy then a second application at a dilution of 1:10 will achieve an even finish. Brick Wash may also be used to remove concrete and cement spatter from portable toilets, cabins and all types of plant and equipment. Always clean down equipment afterwards using clean water. Brick Wash is an acid and will cause corrosion of any metal surfaces.
|
Plant Maintenance Chemicals 
