Info: To add this product into your cart you have to select a product variant on the details page.
Lubricants 
ANTI SPATTER
 |
ANTI SPATTER
|
|
Price (per tin):
£6.28
(Ex VAT)
(100136)
|
|
Safechem’s aerosol anti spatter spray is an effective and economical way of controlling welding spatter. A light spray over the work will prevent most spatter sticking to the surface. A simple wipe with a cloth or rub with a wire brush afterwards will then remove virtually all spatter. It is non silicone based to reduce spatter and formulated to allow easy removal of weld spatter from metal surfaces, nozzles, jigs and fixtures. Anti Spatter creates a heat resistant barrier film that prevents the adhesion of weld spatter and does not effect susequent galvanising or paint operations. Will not interfere with weld formation. Non corrosive Spatter is produced even with freshly shot blasted material. It can be kept to a minimum with a good setting and holding your torch at a good angle which will control the length of the arc. The type of joint can also make a bit of difference, but there are so many variables it’s impossible to eliminate all of it. Spatter is produced when the arc is short circuited You will never eliminate weld spatter only reduce it. Main causes are using a longer arc and voltage that is too high. Use of an excessive current is the most frequent cause of spatter. Safechem’s Anti Spatter ensures easy removal od spatter from the finished job 400ml CFC free aerosol. Boxed quantity 12 tins
|
|
|
|
|
|
You may also be interested in this/these product(s):
|
|
